⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iron County › Mercer (54547)

Mercer, WI (54547): well depth, water level & drilling cost

✓ 1,676 WI DNR records · Iron County

65 ftmedian well depth
43 ft–100 fttypical depth range
18 ftmedian static water level
15 gpmmedian yield (1,287 tests)

Pull every recorded well near a Mercer (54547) address — $49

How deep are wells in and around Mercer (54547), Wisconsin?

The median drilled well depth in and around Mercer (54547) is 65 ft, based on 1,299 wells with recorded depths in the state WI DNR database. Half fall between 43 ft and 100 ft; 90% are shallower than 180 ft.

How much does it cost to drill a well in and around Mercer (54547)?

Applying published per-foot rates to the local median depth of 71 ft: drilling and casing alone typically runs $1,775–$4,615; a complete system including pump, pressure tank, and hookup typically runs $4,260–$7,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mercer (54547)?

The median static water level is 18 ft below ground surface (middle half of wells: 12 ft–25 ft), from 1,329 measurements.

Drilled depth distribution

0–50 ft 376 50–100 ft 584 100–150 ft 161 150–200 ft 67 200–300 ft 95 300–400 ft 15 400–600 ft 1 600+ ft 0
Looking at a specific property in Mercer (54547)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mercer (54547)

Free. Goes to licensed drillers working Iron County.

Part of Iron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.