⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iron County › Saxon (54559)

Saxon, WI (54559): well depth, water level & drilling cost

✓ 287 WI DNR records · Iron County

145 ftmedian well depth
95 ft–200 fttypical depth range
30 ftmedian static water level
10 gpmmedian yield (162 tests)

Pull every recorded well near a Saxon (54559) address — $49

How deep are wells in and around Saxon (54559), Wisconsin?

The median drilled well depth in and around Saxon (54559) is 145 ft, based on 167 wells with recorded depths in the state WI DNR database. Half fall between 95 ft and 200 ft; 90% are shallower than 293 ft.

How much does it cost to drill a well in and around Saxon (54559)?

Applying published per-foot rates to the local median depth of 145 ft: drilling and casing alone typically runs $3,625–$9,425; a complete system including pump, pressure tank, and hookup typically runs $8,700–$14,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Saxon (54559)?

The median static water level is 30 ft below ground surface (middle half of wells: 17 ft–60 ft), from 164 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 39 100–150 ft 42 150–200 ft 34 200–300 ft 27 300–400 ft 15 400–600 ft 2 600+ ft 0
Looking at a specific property in Saxon (54559)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Saxon (54559)

Free. Goes to licensed drillers working Iron County.

Part of Iron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.