⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Adams County › Arkdale (54613)

Arkdale, WI (54613): well depth, water level & drilling cost

✓ 2,197 WI DNR records · Adams County

57 ftmedian well depth
50 ft–64 fttypical depth range
23 ftmedian static water level
12 gpmmedian yield (1,949 tests)

Pull every recorded well near a Arkdale (54613) address — $49

How deep are wells in and around Arkdale (54613), Wisconsin?

The median drilled well depth in and around Arkdale (54613) is 57 ft, based on 1,998 wells with recorded depths in the state WI DNR database. Half fall between 50 ft and 64 ft; 90% are shallower than 75 ft.

How much does it cost to drill a well in and around Arkdale (54613)?

Applying published per-foot rates to the local median depth of 61 ft: drilling and casing alone typically runs $1,525–$3,965; a complete system including pump, pressure tank, and hookup typically runs $3,660–$6,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Arkdale (54613)?

The median static water level is 23 ft below ground surface (middle half of wells: 14 ft–31 ft), from 2,001 measurements.

Drilled depth distribution

0–50 ft 475 50–100 ft 1,477 100–150 ft 38 150–200 ft 7 200–300 ft 1 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Arkdale (54613)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Arkdale (54613)

Free. Goes to licensed drillers working Adams County.

Part of Adams County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.