⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Trempealeau County › Blair (54616)

Blair, WI (54616): well depth, water level & drilling cost

✓ 422 WI DNR records · Trempealeau County

85 ftmedian well depth
60 ft–165 fttypical depth range
40 ftmedian static water level
12 gpmmedian yield (248 tests)

Pull every recorded well near a Blair (54616) address — $49

How deep are wells in and around Blair (54616), Wisconsin?

The median drilled well depth in and around Blair (54616) is 85 ft, based on 279 wells with recorded depths in the state WI DNR database. Half fall between 60 ft and 165 ft; 90% are shallower than 202 ft.

How much does it cost to drill a well in and around Blair (54616)?

Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Blair (54616)?

The median static water level is 40 ft below ground surface (middle half of wells: 21 ft–120 ft), from 249 measurements.

Drilled depth distribution

0–50 ft 31 50–100 ft 127 100–150 ft 42 150–200 ft 41 200–300 ft 36 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Blair (54616)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Blair (54616)

Free. Goes to licensed drillers working Trempealeau County.

Part of Trempealeau County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.