⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Vernon County › Chaseburg (54621)

Chaseburg, WI (54621): well depth, water level & drilling cost

✓ 315 WI DNR records · Vernon County

200 ftmedian well depth
120 ft–441 fttypical depth range
143 ftmedian static water level
10 gpmmedian yield (234 tests)

Pull every recorded well near a Chaseburg (54621) address — $49

How deep are wells in and around Chaseburg (54621), Wisconsin?

The median drilled well depth in and around Chaseburg (54621) is 200 ft, based on 288 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 441 ft; 90% are shallower than 552 ft.

How much does it cost to drill a well in and around Chaseburg (54621)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Chaseburg (54621)?

The median static water level is 143 ft below ground surface (middle half of wells: 56 ft–318 ft), from 234 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 26 100–150 ft 92 150–200 ft 25 200–300 ft 21 300–400 ft 38 400–600 ft 77 600+ ft 9
Looking at a specific property in Chaseburg (54621)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Chaseburg (54621)

Free. Goes to licensed drillers working Vernon County.

Part of Vernon County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.