Wisconsin Well Data › Crawford County › Ferryville (54628)
Ferryville, WI (54628): well depth, water level & drilling cost
✓ 496 WI DNR records · Crawford County
Pull every recorded well near a Ferryville (54628) address — $49
How deep are wells in and around Ferryville (54628), Wisconsin?
The median drilled well depth in and around Ferryville (54628) is 200 ft, based on 468 wells with recorded depths in the state WI DNR database. Half fall between 125 ft and 400 ft; 90% are shallower than 540 ft.
How much does it cost to drill a well in and around Ferryville (54628)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Ferryville (54628)?
The median static water level is 164 ft below ground surface (middle half of wells: 60 ft–316 ft), from 329 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Crawford County.
Part of Crawford County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.