Wisconsin Well Data › Buffalo County › Fountain City (54629)
Fountain City, WI (54629): well depth, water level & drilling cost
✓ 653 WI DNR records · Buffalo County
Pull every recorded well near a Fountain City (54629) address — $49
How deep are wells in and around Fountain City (54629), Wisconsin?
The median drilled well depth in and around Fountain City (54629) is 100 ft, based on 417 wells with recorded depths in the state WI DNR database. Half fall between 68 ft and 150 ft; 90% are shallower than 460 ft.
How much does it cost to drill a well in and around Fountain City (54629)?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Fountain City (54629)?
The median static water level is 45 ft below ground surface (middle half of wells: 32 ft–90 ft), from 419 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Buffalo County.
Part of Buffalo County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.