Wisconsin Well Data › Trempealeau County › Galesville (54630)
Galesville, WI (54630): well depth, water level & drilling cost
✓ 740 WI DNR records · Trempealeau County
Pull every recorded well near a Galesville (54630) address — $49
How deep are wells in and around Galesville (54630), Wisconsin?
The median drilled well depth in and around Galesville (54630) is 125 ft, based on 490 wells with recorded depths in the state WI DNR database. Half fall between 100 ft and 160 ft; 90% are shallower than 194 ft.
How much does it cost to drill a well in and around Galesville (54630)?
Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Galesville (54630)?
The median static water level is 63 ft below ground surface (middle half of wells: 45 ft–77 ft), from 449 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Trempealeau County.
Part of Trempealeau County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.