⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Vernon County › Hillsboro (54634)

Hillsboro, WI (54634): well depth, water level & drilling cost

✓ 645 WI DNR records · Vernon County

185 ftmedian well depth
125 ft–305 fttypical depth range
114 ftmedian static water level
10 gpmmedian yield (468 tests)

Pull every recorded well near a Hillsboro (54634) address — $49

How deep are wells in and around Hillsboro (54634), Wisconsin?

The median drilled well depth in and around Hillsboro (54634) is 185 ft, based on 522 wells with recorded depths in the state WI DNR database. Half fall between 125 ft and 305 ft; 90% are shallower than 385 ft.

How much does it cost to drill a well in and around Hillsboro (54634)?

Applying published per-foot rates to the local median depth of 185 ft: drilling and casing alone typically runs $4,625–$12,025; a complete system including pump, pressure tank, and hookup typically runs $11,100–$18,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hillsboro (54634)?

The median static water level is 114 ft below ground surface (middle half of wells: 60 ft–200 ft), from 470 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 50 100–150 ft 160 150–200 ft 63 200–300 ft 108 300–400 ft 92 400–600 ft 48 600+ ft 1
Looking at a specific property in Hillsboro (54634)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hillsboro (54634)

Free. Goes to licensed drillers working Vernon County.

Part of Vernon County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.