⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Monroe County › Kendall (54638)

Kendall, WI (54638): well depth, water level & drilling cost

✓ 354 WI DNR records · Monroe County

200 ftmedian well depth
125 ft–280 fttypical depth range
128 ftmedian static water level
15 gpmmedian yield (254 tests)

Pull every recorded well near a Kendall (54638) address — $49

How deep are wells in and around Kendall (54638), Wisconsin?

The median drilled well depth in and around Kendall (54638) is 200 ft, based on 259 wells with recorded depths in the state WI DNR database. Half fall between 125 ft and 280 ft; 90% are shallower than 366 ft.

How much does it cost to drill a well in and around Kendall (54638)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kendall (54638)?

The median static water level is 128 ft below ground surface (middle half of wells: 63 ft–205 ft), from 255 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 30 100–150 ft 57 150–200 ft 34 200–300 ft 78 300–400 ft 36 400–600 ft 21 600+ ft 0
Looking at a specific property in Kendall (54638)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kendall (54638)

Free. Goes to licensed drillers working Monroe County.

Part of Monroe County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.