⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Crawford County › Lynxville (54640)

Lynxville, WI (54640): well depth, water level & drilling cost

✓ 187 WI DNR records · Crawford County

239 ftmedian well depth
115 ft–504 fttypical depth range
337 ftmedian static water level
10 gpmmedian yield (123 tests)

Pull every recorded well near a Lynxville (54640) address — $49

How deep are wells in and around Lynxville (54640), Wisconsin?

The median drilled well depth in and around Lynxville (54640) is 239 ft, based on 186 wells with recorded depths in the state WI DNR database. Half fall between 115 ft and 504 ft; 90% are shallower than 550 ft.

How much does it cost to drill a well in and around Lynxville (54640)?

Applying published per-foot rates to the local median depth of 239 ft: drilling and casing alone typically runs $5,975–$15,535; a complete system including pump, pressure tank, and hookup typically runs $14,340–$23,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lynxville (54640)?

The median static water level is 337 ft below ground surface (middle half of wells: 71 ft–413 ft), from 123 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 28 100–150 ft 44 150–200 ft 18 200–300 ft 4 300–400 ft 6 400–600 ft 83 600+ ft 3
Looking at a specific property in Lynxville (54640)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lynxville (54640)

Free. Goes to licensed drillers working Crawford County.

Part of Crawford County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.