⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Jackson County › Mather (54641)

Mather, WI (54641): well depth, water level & drilling cost

✓ 115 WI DNR records · Jackson County

60 ftmedian well depth
50 ft–70 fttypical depth range
10 ftmedian static water level
12 gpmmedian yield (90 tests)

Pull every recorded well near a Mather (54641) address — $49

How deep are wells in and around Mather (54641), Wisconsin?

The median drilled well depth in and around Mather (54641) is 60 ft, based on 91 wells with recorded depths in the state WI DNR database. Half fall between 50 ft and 70 ft; 90% are shallower than 90 ft.

How much does it cost to drill a well in and around Mather (54641)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mather (54641)?

The median static water level is 10 ft below ground surface (middle half of wells: 7 ft–15 ft), from 91 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 72 100–150 ft 4 150–200 ft 3 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Mather (54641)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mather (54641)

Free. Goes to licensed drillers working Jackson County.

Part of Jackson County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.