⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Jackson County › Melrose (54642)

Melrose, WI (54642): well depth, water level & drilling cost

✓ 636 WI DNR records · Jackson County

103 ftmedian well depth
75 ft–140 fttypical depth range
58 ftmedian static water level
12 gpmmedian yield (444 tests)

Pull every recorded well near a Melrose (54642) address — $49

How deep are wells in and around Melrose (54642), Wisconsin?

The median drilled well depth in and around Melrose (54642) is 103 ft, based on 448 wells with recorded depths in the state WI DNR database. Half fall between 75 ft and 140 ft; 90% are shallower than 183 ft.

How much does it cost to drill a well in and around Melrose (54642)?

Applying published per-foot rates to the local median depth of 103 ft: drilling and casing alone typically runs $2,575–$6,695; a complete system including pump, pressure tank, and hookup typically runs $6,180–$10,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Melrose (54642)?

The median static water level is 58 ft below ground surface (middle half of wells: 33 ft–84 ft), from 445 measurements.

Drilled depth distribution

0–50 ft 38 50–100 ft 148 100–150 ft 169 150–200 ft 59 200–300 ft 29 300–400 ft 4 400–600 ft 1 600+ ft 0
Looking at a specific property in Melrose (54642)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Melrose (54642)

Free. Goes to licensed drillers working Jackson County.

Part of Jackson County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.