⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Vernon County › Readstown (54652)

Readstown, WI (54652): well depth, water level & drilling cost

✓ 375 WI DNR records · Vernon County

234 ftmedian well depth
120 ft–343 fttypical depth range
153 ftmedian static water level
10 gpmmedian yield (288 tests)

Pull every recorded well near a Readstown (54652) address — $49

How deep are wells in and around Readstown (54652), Wisconsin?

The median drilled well depth in and around Readstown (54652) is 234 ft, based on 343 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 343 ft; 90% are shallower than 460 ft.

How much does it cost to drill a well in and around Readstown (54652)?

Applying published per-foot rates to the local median depth of 234 ft: drilling and casing alone typically runs $5,850–$15,210; a complete system including pump, pressure tank, and hookup typically runs $14,040–$23,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Readstown (54652)?

The median static water level is 153 ft below ground surface (middle half of wells: 43 ft–242 ft), from 288 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 31 100–150 ft 89 150–200 ft 32 200–300 ft 54 300–400 ft 69 400–600 ft 67 600+ ft 0
Looking at a specific property in Readstown (54652)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Readstown (54652)

Free. Goes to licensed drillers working Vernon County.

Part of Vernon County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.