⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Monroe County › Sparta (54656)

Sparta, WI (54656): well depth, water level & drilling cost

✓ 1,415 WI DNR records · Monroe County

76 ftmedian well depth
57 ft–109 fttypical depth range
28 ftmedian static water level
10 gpmmedian yield (974 tests)

Pull every recorded well near a Sparta (54656) address — $49

How deep are wells in and around Sparta (54656), Wisconsin?

The median drilled well depth in and around Sparta (54656) is 76 ft, based on 983 wells with recorded depths in the state WI DNR database. Half fall between 57 ft and 109 ft; 90% are shallower than 145 ft.

How much does it cost to drill a well in and around Sparta (54656)?

Applying published per-foot rates to the local median depth of 76 ft: drilling and casing alone typically runs $1,900–$4,940; a complete system including pump, pressure tank, and hookup typically runs $4,560–$7,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sparta (54656)?

The median static water level is 28 ft below ground surface (middle half of wells: 16 ft–55 ft), from 978 measurements.

Drilled depth distribution

0–50 ft 119 50–100 ft 549 100–150 ft 223 150–200 ft 45 200–300 ft 20 300–400 ft 24 400–600 ft 2 600+ ft 1
Looking at a specific property in Sparta (54656)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sparta (54656)

Free. Goes to licensed drillers working Monroe County.

Part of Monroe County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.