⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Vernon County › Stoddard (54658)

Stoddard, WI (54658): well depth, water level & drilling cost

✓ 443 WI DNR records · Vernon County

140 ftmedian well depth
107 ft–186 fttypical depth range
72 ftmedian static water level
12 gpmmedian yield (265 tests)

Pull every recorded well near a Stoddard (54658) address — $49

How deep are wells in and around Stoddard (54658), Wisconsin?

The median drilled well depth in and around Stoddard (54658) is 140 ft, based on 356 wells with recorded depths in the state WI DNR database. Half fall between 107 ft and 186 ft; 90% are shallower than 560 ft.

How much does it cost to drill a well in and around Stoddard (54658)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Stoddard (54658)?

The median static water level is 72 ft below ground surface (middle half of wells: 47 ft–149 ft), from 266 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 61 100–150 ft 137 150–200 ft 73 200–300 ft 14 300–400 ft 4 400–600 ft 45 600+ ft 18
Looking at a specific property in Stoddard (54658)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Stoddard (54658)

Free. Goes to licensed drillers working Vernon County.

Part of Vernon County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.