⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Jackson County › Taylor (54659)

Taylor, WI (54659): well depth, water level & drilling cost

✓ 549 WI DNR records · Jackson County

79 ftmedian well depth
60 ft–100 fttypical depth range
32 ftmedian static water level
12 gpmmedian yield (334 tests)

Pull every recorded well near a Taylor (54659) address — $49

How deep are wells in and around Taylor (54659), Wisconsin?

The median drilled well depth in and around Taylor (54659) is 79 ft, based on 346 wells with recorded depths in the state WI DNR database. Half fall between 60 ft and 100 ft; 90% are shallower than 195 ft.

How much does it cost to drill a well in and around Taylor (54659)?

Applying published per-foot rates to the local median depth of 79 ft: drilling and casing alone typically runs $1,975–$5,135; a complete system including pump, pressure tank, and hookup typically runs $4,740–$7,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Taylor (54659)?

The median static water level is 32 ft below ground surface (middle half of wells: 20 ft–55 ft), from 337 measurements.

Drilled depth distribution

0–50 ft 45 50–100 ft 206 100–150 ft 47 150–200 ft 13 200–300 ft 26 300–400 ft 7 400–600 ft 2 600+ ft 0
Looking at a specific property in Taylor (54659)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Taylor (54659)

Free. Goes to licensed drillers working Jackson County.

Part of Jackson County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.