⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Monroe County › Tomah (54660)

Tomah, WI (54660): well depth, water level & drilling cost

✓ 836 WI DNR records · Monroe County

90 ftmedian well depth
64 ft–140 fttypical depth range
23 ftmedian static water level
15 gpmmedian yield (543 tests)

Pull every recorded well near a Tomah (54660) address — $49

How deep are wells in and around Tomah (54660), Wisconsin?

The median drilled well depth in and around Tomah (54660) is 90 ft, based on 549 wells with recorded depths in the state WI DNR database. Half fall between 64 ft and 140 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Tomah (54660)?

Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Tomah (54660)?

The median static water level is 23 ft below ground surface (middle half of wells: 12 ft–72 ft), from 545 measurements.

Drilled depth distribution

0–50 ft 44 50–100 ft 262 100–150 ft 117 150–200 ft 60 200–300 ft 60 300–400 ft 4 400–600 ft 2 600+ ft 0
Looking at a specific property in Tomah (54660)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Tomah (54660)

Free. Goes to licensed drillers working Monroe County.

Part of Monroe County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.