⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Eau Claire County › Altoona (54720)

Altoona, WI (54720): well depth, water level & drilling cost

✓ 2,507 WI DNR records · Eau Claire County

90 ftmedian well depth
70 ft–114 fttypical depth range
49 ftmedian static water level
15 gpmmedian yield (1,098 tests)

Pull every recorded well near a Altoona (54720) address — $49

How deep are wells in and around Altoona (54720), Wisconsin?

The median drilled well depth in and around Altoona (54720) is 90 ft, based on 1,147 wells with recorded depths in the state WI DNR database. Half fall between 70 ft and 114 ft; 90% are shallower than 145 ft.

How much does it cost to drill a well in and around Altoona (54720)?

Applying published per-foot rates to the local median depth of 93 ft: drilling and casing alone typically runs $2,325–$6,045; a complete system including pump, pressure tank, and hookup typically runs $5,580–$9,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Altoona (54720)?

The median static water level is 49 ft below ground surface (middle half of wells: 31 ft–65 ft), from 1,141 measurements.

Drilled depth distribution

0–50 ft 70 50–100 ft 585 100–150 ft 382 150–200 ft 61 200–300 ft 34 300–400 ft 15 400–600 ft 0 600+ ft 0
Looking at a specific property in Altoona (54720)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Altoona (54720)

Free. Goes to licensed drillers working Eau Claire County.

Part of Eau Claire County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.