⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Pepin County › Arkansaw (54721)

Arkansaw, WI (54721): well depth, water level & drilling cost

✓ 494 WI DNR records · Pepin County

117 ftmedian well depth
90 ft–140 fttypical depth range
74 ftmedian static water level
12 gpmmedian yield (281 tests)

Pull every recorded well near a Arkansaw (54721) address — $49

How deep are wells in and around Arkansaw (54721), Wisconsin?

The median drilled well depth in and around Arkansaw (54721) is 117 ft, based on 283 wells with recorded depths in the state WI DNR database. Half fall between 90 ft and 140 ft; 90% are shallower than 209 ft.

How much does it cost to drill a well in and around Arkansaw (54721)?

Applying published per-foot rates to the local median depth of 117 ft: drilling and casing alone typically runs $2,925–$7,605; a complete system including pump, pressure tank, and hookup typically runs $7,020–$11,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Arkansaw (54721)?

The median static water level is 74 ft below ground surface (middle half of wells: 40 ft–93 ft), from 283 measurements.

Drilled depth distribution

0–50 ft 20 50–100 ft 60 100–150 ft 147 150–200 ft 21 200–300 ft 11 300–400 ft 8 400–600 ft 15 600+ ft 1
Looking at a specific property in Arkansaw (54721)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Arkansaw (54721)

Free. Goes to licensed drillers working Pepin County.

Part of Pepin County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.