⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County › Chetek (54728)

Chetek, WI (54728): well depth, water level & drilling cost

✓ 2,100 WI DNR records · Barron County

61 ftmedian well depth
45 ft–85 fttypical depth range
25 ftmedian static water level
15 gpmmedian yield (1,536 tests)

Pull every recorded well near a Chetek (54728) address — $49

How deep are wells in and around Chetek (54728), Wisconsin?

The median drilled well depth in and around Chetek (54728) is 61 ft, based on 1,690 wells with recorded depths in the state WI DNR database. Half fall between 45 ft and 85 ft; 90% are shallower than 122 ft.

How much does it cost to drill a well in and around Chetek (54728)?

Applying published per-foot rates to the local median depth of 78 ft: drilling and casing alone typically runs $1,950–$5,070; a complete system including pump, pressure tank, and hookup typically runs $4,680–$7,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Chetek (54728)?

The median static water level is 25 ft below ground surface (middle half of wells: 17 ft–36 ft), from 1,672 measurements.

Drilled depth distribution

0–50 ft 471 50–100 ft 850 100–150 ft 267 150–200 ft 77 200–300 ft 25 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Chetek (54728)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Chetek (54728)

Free. Goes to licensed drillers working Barron County.

Part of Barron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.