⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dunn County › Colfax (54730)

Colfax, WI (54730): well depth, water level & drilling cost

✓ 1,315 WI DNR records · Dunn County

100 ftmedian well depth
64 ft–130 fttypical depth range
42 ftmedian static water level
15 gpmmedian yield (923 tests)

Pull every recorded well near a Colfax (54730) address — $49

How deep are wells in and around Colfax (54730), Wisconsin?

The median drilled well depth in and around Colfax (54730) is 100 ft, based on 930 wells with recorded depths in the state WI DNR database. Half fall between 64 ft and 130 ft; 90% are shallower than 160 ft.

How much does it cost to drill a well in and around Colfax (54730)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Colfax (54730)?

The median static water level is 42 ft below ground surface (middle half of wells: 25 ft–70 ft), from 927 measurements.

Drilled depth distribution

0–50 ft 112 50–100 ft 336 100–150 ft 336 150–200 ft 105 200–300 ft 32 300–400 ft 9 400–600 ft 0 600+ ft 0
Looking at a specific property in Colfax (54730)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Colfax (54730)

Free. Goes to licensed drillers working Dunn County.

Part of Dunn County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.