⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Rusk County › Conrath (54731)

Conrath, WI (54731): well depth, water level & drilling cost

✓ 485 WI DNR records · Rusk County

56 ftmedian well depth
41 ft–78 fttypical depth range
19 ftmedian static water level
8 gpmmedian yield (283 tests)

Pull every recorded well near a Conrath (54731) address — $49

How deep are wells in and around Conrath (54731), Wisconsin?

The median drilled well depth in and around Conrath (54731) is 56 ft, based on 295 wells with recorded depths in the state WI DNR database. Half fall between 41 ft and 78 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Conrath (54731)?

Applying published per-foot rates to the local median depth of 56 ft: drilling and casing alone typically runs $1,400–$3,640; a complete system including pump, pressure tank, and hookup typically runs $3,360–$5,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Conrath (54731)?

The median static water level is 19 ft below ground surface (middle half of wells: 14 ft–27 ft), from 288 measurements.

Drilled depth distribution

0–50 ft 113 50–100 ft 131 100–150 ft 13 150–200 ft 4 200–300 ft 22 300–400 ft 5 400–600 ft 7 600+ ft 0
Looking at a specific property in Conrath (54731)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Conrath (54731)

Free. Goes to licensed drillers working Rusk County.

Part of Rusk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.