⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County › Dallas (54733)

Dallas, WI (54733): well depth, water level & drilling cost

✓ 390 WI DNR records · Barron County

120 ftmedian well depth
81 ft–144 fttypical depth range
60 ftmedian static water level
15 gpmmedian yield (269 tests)

Pull every recorded well near a Dallas (54733) address — $49

How deep are wells in and around Dallas (54733), Wisconsin?

The median drilled well depth in and around Dallas (54733) is 120 ft, based on 275 wells with recorded depths in the state WI DNR database. Half fall between 81 ft and 144 ft; 90% are shallower than 180 ft.

How much does it cost to drill a well in and around Dallas (54733)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dallas (54733)?

The median static water level is 60 ft below ground surface (middle half of wells: 31 ft–92 ft), from 271 measurements.

Drilled depth distribution

0–50 ft 20 50–100 ft 66 100–150 ft 121 150–200 ft 45 200–300 ft 22 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Dallas (54733)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dallas (54733)

Free. Goes to licensed drillers working Barron County.

Part of Barron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.