⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dunn County › Downsville (54735)

Downsville, WI (54735): well depth, water level & drilling cost

✓ 562 WI DNR records · Dunn County

120 ftmedian well depth
85 ft–140 fttypical depth range
63 ftmedian static water level
15 gpmmedian yield (314 tests)

Pull every recorded well near a Downsville (54735) address — $49

How deep are wells in and around Downsville (54735), Wisconsin?

The median drilled well depth in and around Downsville (54735) is 120 ft, based on 315 wells with recorded depths in the state WI DNR database. Half fall between 85 ft and 140 ft; 90% are shallower than 160 ft.

How much does it cost to drill a well in and around Downsville (54735)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Downsville (54735)?

The median static water level is 63 ft below ground surface (middle half of wells: 35 ft–84 ft), from 314 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 92 100–150 ft 153 150–200 ft 47 200–300 ft 14 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Downsville (54735)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Downsville (54735)

Free. Goes to licensed drillers working Dunn County.

Part of Dunn County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.