⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dunn County › Eau Galle (54737)

Eau Galle, WI (54737): well depth, water level & drilling cost

✓ 357 WI DNR records · Dunn County

103 ftmedian well depth
80 ft–132 fttypical depth range
50 ftmedian static water level
12 gpmmedian yield (216 tests)

Pull every recorded well near a Eau Galle (54737) address — $49

How deep are wells in and around Eau Galle (54737), Wisconsin?

The median drilled well depth in and around Eau Galle (54737) is 103 ft, based on 219 wells with recorded depths in the state WI DNR database. Half fall between 80 ft and 132 ft; 90% are shallower than 160 ft.

How much does it cost to drill a well in and around Eau Galle (54737)?

Applying published per-foot rates to the local median depth of 103 ft: drilling and casing alone typically runs $2,575–$6,695; a complete system including pump, pressure tank, and hookup typically runs $6,180–$10,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Eau Galle (54737)?

The median static water level is 50 ft below ground surface (middle half of wells: 34 ft–75 ft), from 216 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 81 100–150 ft 92 150–200 ft 24 200–300 ft 12 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Eau Galle (54737)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Eau Galle (54737)

Free. Goes to licensed drillers working Dunn County.

Part of Dunn County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.