⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dunn County › Elk Mound (54739)

Elk Mound, WI (54739): well depth, water level & drilling cost

✓ 1,950 WI DNR records · Dunn County

100 ftmedian well depth
70 ft–130 fttypical depth range
42 ftmedian static water level
15 gpmmedian yield (1,241 tests)

Pull every recorded well near a Elk Mound (54739) address — $49

How deep are wells in and around Elk Mound (54739), Wisconsin?

The median drilled well depth in and around Elk Mound (54739) is 100 ft, based on 1,265 wells with recorded depths in the state WI DNR database. Half fall between 70 ft and 130 ft; 90% are shallower than 161 ft.

How much does it cost to drill a well in and around Elk Mound (54739)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Elk Mound (54739)?

The median static water level is 42 ft below ground surface (middle half of wells: 23 ft–65 ft), from 1,260 measurements.

Drilled depth distribution

0–50 ft 151 50–100 ft 418 100–150 ft 505 150–200 ft 153 200–300 ft 34 300–400 ft 3 400–600 ft 0 600+ ft 1
Looking at a specific property in Elk Mound (54739)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elk Mound (54739)

Free. Goes to licensed drillers working Dunn County.

Part of Dunn County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.