⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Pierce County › Elmwood (54740)

Elmwood, WI (54740): well depth, water level & drilling cost

✓ 381 WI DNR records · Pierce County

240 ftmedian well depth
120 ft–282 fttypical depth range
161 ftmedian static water level
10 gpmmedian yield (250 tests)

Pull every recorded well near a Elmwood (54740) address — $49

How deep are wells in and around Elmwood (54740), Wisconsin?

The median drilled well depth in and around Elmwood (54740) is 240 ft, based on 259 wells with recorded depths in the state WI DNR database. Half fall between 120 ft and 282 ft; 90% are shallower than 332 ft.

How much does it cost to drill a well in and around Elmwood (54740)?

Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Elmwood (54740)?

The median static water level is 161 ft below ground surface (middle half of wells: 50 ft–205 ft), from 256 measurements.

Drilled depth distribution

0–50 ft 12 50–100 ft 40 100–150 ft 32 150–200 ft 13 200–300 ft 107 300–400 ft 49 400–600 ft 6 600+ ft 0
Looking at a specific property in Elmwood (54740)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elmwood (54740)

Free. Goes to licensed drillers working Pierce County.

Part of Pierce County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.