⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Buffalo County › Gilmanton (54743)

Gilmanton, WI (54743): well depth, water level & drilling cost

✓ 323 WI DNR records · Buffalo County

85 ftmedian well depth
61 ft–125 fttypical depth range
40 ftmedian static water level
12 gpmmedian yield (225 tests)

Pull every recorded well near a Gilmanton (54743) address — $49

How deep are wells in and around Gilmanton (54743), Wisconsin?

The median drilled well depth in and around Gilmanton (54743) is 85 ft, based on 224 wells with recorded depths in the state WI DNR database. Half fall between 61 ft and 125 ft; 90% are shallower than 180 ft.

How much does it cost to drill a well in and around Gilmanton (54743)?

Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Gilmanton (54743)?

The median static water level is 40 ft below ground surface (middle half of wells: 25 ft–65 ft), from 226 measurements.

Drilled depth distribution

0–50 ft 21 50–100 ft 107 100–150 ft 62 150–200 ft 16 200–300 ft 8 300–400 ft 1 400–600 ft 9 600+ ft 0
Looking at a specific property in Gilmanton (54743)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Gilmanton (54743)

Free. Goes to licensed drillers working Buffalo County.

Part of Buffalo County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.