⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Chippewa County › Holcombe (54745)

Holcombe, WI (54745): well depth, water level & drilling cost

✓ 1,600 WI DNR records · Chippewa County

49 ftmedian well depth
35 ft–72 fttypical depth range
12 ftmedian static water level
10 gpmmedian yield (1,063 tests)

Pull every recorded well near a Holcombe (54745) address — $49

How deep are wells in and around Holcombe (54745), Wisconsin?

The median drilled well depth in and around Holcombe (54745) is 49 ft, based on 1,075 wells with recorded depths in the state WI DNR database. Half fall between 35 ft and 72 ft; 90% are shallower than 111 ft.

How much does it cost to drill a well in and around Holcombe (54745)?

Applying published per-foot rates to the local median depth of 54 ft: drilling and casing alone typically runs $1,350–$3,510; a complete system including pump, pressure tank, and hookup typically runs $3,240–$5,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Holcombe (54745)?

The median static water level is 12 ft below ground surface (middle half of wells: 9 ft–20 ft), from 1,071 measurements.

Drilled depth distribution

0–50 ft 546 50–100 ft 390 100–150 ft 73 150–200 ft 22 200–300 ft 30 300–400 ft 11 400–600 ft 3 600+ ft 0
Looking at a specific property in Holcombe (54745)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Holcombe (54745)

Free. Goes to licensed drillers working Chippewa County.

Part of Chippewa County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.