⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Chippewa County › Jim Falls (54748)

Jim Falls, WI (54748): well depth, water level & drilling cost

✓ 1,164 WI DNR records · Chippewa County

77 ftmedian well depth
55 ft–104 fttypical depth range
31 ftmedian static water level
12 gpmmedian yield (759 tests)

Pull every recorded well near a Jim Falls (54748) address — $49

How deep are wells in and around Jim Falls (54748), Wisconsin?

The median drilled well depth in and around Jim Falls (54748) is 77 ft, based on 767 wells with recorded depths in the state WI DNR database. Half fall between 55 ft and 104 ft; 90% are shallower than 163 ft.

How much does it cost to drill a well in and around Jim Falls (54748)?

Applying published per-foot rates to the local median depth of 81 ft: drilling and casing alone typically runs $2,025–$5,265; a complete system including pump, pressure tank, and hookup typically runs $4,860–$8,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Jim Falls (54748)?

The median static water level is 31 ft below ground surface (middle half of wells: 18 ft–48 ft), from 761 measurements.

Drilled depth distribution

0–50 ft 148 50–100 ft 382 100–150 ft 145 150–200 ft 34 200–300 ft 29 300–400 ft 22 400–600 ft 5 600+ ft 2
Looking at a specific property in Jim Falls (54748)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Jim Falls (54748)

Free. Goes to licensed drillers working Chippewa County.

Part of Chippewa County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.