⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dunn County › Knapp (54749)

Knapp, WI (54749): well depth, water level & drilling cost

✓ 539 WI DNR records · Dunn County

120 ftmedian well depth
85 ft–200 fttypical depth range
62 ftmedian static water level
12 gpmmedian yield (364 tests)

Pull every recorded well near a Knapp (54749) address — $49

How deep are wells in and around Knapp (54749), Wisconsin?

The median drilled well depth in and around Knapp (54749) is 120 ft, based on 365 wells with recorded depths in the state WI DNR database. Half fall between 85 ft and 200 ft; 90% are shallower than 280 ft.

How much does it cost to drill a well in and around Knapp (54749)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Knapp (54749)?

The median static water level is 62 ft below ground surface (middle half of wells: 35 ft–140 ft), from 364 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 121 100–150 ft 112 150–200 ft 32 200–300 ft 63 300–400 ft 28 400–600 ft 3 600+ ft 1
Looking at a specific property in Knapp (54749)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Knapp (54749)

Free. Goes to licensed drillers working Dunn County.

Part of Dunn County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.