⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Jackson County › Merrillan (54754)

Merrillan, WI (54754): well depth, water level & drilling cost

✓ 1,150 WI DNR records · Jackson County

80 ftmedian well depth
58 ft–138 fttypical depth range
17 ftmedian static water level
10 gpmmedian yield (854 tests)

Pull every recorded well near a Merrillan (54754) address — $49

How deep are wells in and around Merrillan (54754), Wisconsin?

The median drilled well depth in and around Merrillan (54754) is 80 ft, based on 861 wells with recorded depths in the state WI DNR database. Half fall between 58 ft and 138 ft; 90% are shallower than 220 ft.

How much does it cost to drill a well in and around Merrillan (54754)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Merrillan (54754)?

The median static water level is 17 ft below ground surface (middle half of wells: 10 ft–30 ft), from 863 measurements.

Drilled depth distribution

0–50 ft 154 50–100 ft 384 100–150 ft 131 150–200 ft 58 200–300 ft 131 300–400 ft 3 400–600 ft 0 600+ ft 0
Looking at a specific property in Merrillan (54754)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Merrillan (54754)

Free. Goes to licensed drillers working Jackson County.

Part of Jackson County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.