⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Pepin County › Pepin (54759)

Pepin, WI (54759): well depth, water level & drilling cost

✓ 333 WI DNR records · Pepin County

107 ftmedian well depth
84 ft–240 fttypical depth range
59 ftmedian static water level
12 gpmmedian yield (255 tests)

Pull every recorded well near a Pepin (54759) address — $49

How deep are wells in and around Pepin (54759), Wisconsin?

The median drilled well depth in and around Pepin (54759) is 107 ft, based on 257 wells with recorded depths in the state WI DNR database. Half fall between 84 ft and 240 ft; 90% are shallower than 420 ft.

How much does it cost to drill a well in and around Pepin (54759)?

Applying published per-foot rates to the local median depth of 107 ft: drilling and casing alone typically runs $2,675–$6,955; a complete system including pump, pressure tank, and hookup typically runs $6,420–$10,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pepin (54759)?

The median static water level is 59 ft below ground surface (middle half of wells: 48 ft–130 ft), from 257 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 100 100–150 ft 55 150–200 ft 18 200–300 ft 15 300–400 ft 27 400–600 ft 32 600+ ft 0
Looking at a specific property in Pepin (54759)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pepin (54759)

Free. Goes to licensed drillers working Pepin County.

Part of Pepin County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.