Wisconsin Well Data › Trempealeau County › Pigeon Falls (54760)
Pigeon Falls, WI (54760): well depth, water level & drilling cost
✓ 423 WI DNR records · Trempealeau County
Pull every recorded well near a Pigeon Falls (54760) address — $49
How deep are wells in and around Pigeon Falls (54760), Wisconsin?
The median drilled well depth in and around Pigeon Falls (54760) is 83 ft, based on 334 wells with recorded depths in the state WI DNR database. Half fall between 55 ft and 124 ft; 90% are shallower than 160 ft.
How much does it cost to drill a well in and around Pigeon Falls (54760)?
Applying published per-foot rates to the local median depth of 83 ft: drilling and casing alone typically runs $2,075–$5,395; a complete system including pump, pressure tank, and hookup typically runs $4,980–$8,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Pigeon Falls (54760)?
The median static water level is 36 ft below ground surface (middle half of wells: 20 ft–70 ft), from 278 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Trempealeau County.
Part of Trempealeau County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.