⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Pierce County › Plum City (54761)

Plum City, WI (54761): well depth, water level & drilling cost

✓ 272 WI DNR records · Pierce County

90 ftmedian well depth
58 ft–290 fttypical depth range
41 ftmedian static water level
10 gpmmedian yield (206 tests)

Pull every recorded well near a Plum City (54761) address — $49

How deep are wells in and around Plum City (54761), Wisconsin?

The median drilled well depth in and around Plum City (54761) is 90 ft, based on 213 wells with recorded depths in the state WI DNR database. Half fall between 58 ft and 290 ft; 90% are shallower than 339 ft.

How much does it cost to drill a well in and around Plum City (54761)?

Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Plum City (54761)?

The median static water level is 41 ft below ground surface (middle half of wells: 22 ft–214 ft), from 214 measurements.

Drilled depth distribution

0–50 ft 31 50–100 ft 85 100–150 ft 18 150–200 ft 2 200–300 ft 26 300–400 ft 48 400–600 ft 3 600+ ft 0
Looking at a specific property in Plum City (54761)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Plum City (54761)

Free. Goes to licensed drillers working Pierce County.

Part of Pierce County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.