⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dunn County › Sand Creek (54765)

Sand Creek, WI (54765): well depth, water level & drilling cost

✓ 489 WI DNR records · Dunn County

100 ftmedian well depth
60 ft–129 fttypical depth range
35 ftmedian static water level
15 gpmmedian yield (357 tests)

Pull every recorded well near a Sand Creek (54765) address — $49

How deep are wells in and around Sand Creek (54765), Wisconsin?

The median drilled well depth in and around Sand Creek (54765) is 100 ft, based on 363 wells with recorded depths in the state WI DNR database. Half fall between 60 ft and 129 ft; 90% are shallower than 160 ft.

How much does it cost to drill a well in and around Sand Creek (54765)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Sand Creek (54765)?

The median static water level is 35 ft below ground surface (middle half of wells: 17 ft–65 ft), from 369 measurements.

Drilled depth distribution

0–50 ft 60 50–100 ft 121 100–150 ft 130 150–200 ft 41 200–300 ft 9 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Sand Creek (54765)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Sand Creek (54765)

Free. Goes to licensed drillers working Dunn County.

Part of Dunn County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.