Wisconsin Well Data › Pierce County › Spring Valley (54767)
Spring Valley, WI (54767): well depth, water level & drilling cost
✓ 530 WI DNR records · Pierce County
Pull every recorded well near a Spring Valley (54767) address — $49
How deep are wells in and around Spring Valley (54767), Wisconsin?
The median drilled well depth in and around Spring Valley (54767) is 200 ft, based on 413 wells with recorded depths in the state WI DNR database. Half fall between 147 ft and 240 ft; 90% are shallower than 270 ft.
How much does it cost to drill a well in and around Spring Valley (54767)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Spring Valley (54767)?
The median static water level is 127 ft below ground surface (middle half of wells: 90 ft–170 ft), from 412 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Pierce County.
Part of Pierce County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.