⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Clark County › Thorp (54771)

Thorp, WI (54771): well depth, water level & drilling cost

✓ 746 WI DNR records · Clark County

95 ftmedian well depth
58 ft–180 fttypical depth range
20 ftmedian static water level
10 gpmmedian yield (453 tests)

Pull every recorded well near a Thorp (54771) address — $49

How deep are wells in and around Thorp (54771), Wisconsin?

The median drilled well depth in and around Thorp (54771) is 95 ft, based on 455 wells with recorded depths in the state WI DNR database. Half fall between 58 ft and 180 ft; 90% are shallower than 253 ft.

How much does it cost to drill a well in and around Thorp (54771)?

Applying published per-foot rates to the local median depth of 95 ft: drilling and casing alone typically runs $2,375–$6,175; a complete system including pump, pressure tank, and hookup typically runs $5,700–$9,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Thorp (54771)?

The median static water level is 20 ft below ground surface (middle half of wells: 14 ft–30 ft), from 457 measurements.

Drilled depth distribution

0–50 ft 56 50–100 ft 179 100–150 ft 63 150–200 ft 54 200–300 ft 70 300–400 ft 13 400–600 ft 17 600+ ft 3
Looking at a specific property in Thorp (54771)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Thorp (54771)

Free. Goes to licensed drillers working Clark County.

Part of Clark County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.