⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dunn County › Wheeler (54772)

Wheeler, WI (54772): well depth, water level & drilling cost

✓ 698 WI DNR records · Dunn County

100 ftmedian well depth
66 ft–120 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (499 tests)

Pull every recorded well near a Wheeler (54772) address — $49

How deep are wells in and around Wheeler (54772), Wisconsin?

The median drilled well depth in and around Wheeler (54772) is 100 ft, based on 502 wells with recorded depths in the state WI DNR database. Half fall between 66 ft and 120 ft; 90% are shallower than 145 ft.

How much does it cost to drill a well in and around Wheeler (54772)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wheeler (54772)?

The median static water level is 40 ft below ground surface (middle half of wells: 25 ft–63 ft), from 503 measurements.

Drilled depth distribution

0–50 ft 42 50–100 ft 202 100–150 ft 209 150–200 ft 27 200–300 ft 19 300–400 ft 3 400–600 ft 0 600+ ft 0
Looking at a specific property in Wheeler (54772)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wheeler (54772)

Free. Goes to licensed drillers working Dunn County.

Part of Dunn County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.