⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County › Almena (54805)

Almena, WI (54805): well depth, water level & drilling cost

✓ 702 WI DNR records · Barron County

100 ftmedian well depth
63 ft–137 fttypical depth range
38 ftmedian static water level
15 gpmmedian yield (443 tests)

Pull every recorded well near a Almena (54805) address — $49

How deep are wells in and around Almena (54805), Wisconsin?

The median drilled well depth in and around Almena (54805) is 100 ft, based on 452 wells with recorded depths in the state WI DNR database. Half fall between 63 ft and 137 ft; 90% are shallower than 190 ft.

How much does it cost to drill a well in and around Almena (54805)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Almena (54805)?

The median static water level is 38 ft below ground surface (middle half of wells: 17 ft–70 ft), from 444 measurements.

Drilled depth distribution

0–50 ft 52 50–100 ft 167 100–150 ft 141 150–200 ft 56 200–300 ft 29 300–400 ft 3 400–600 ft 4 600+ ft 0
Looking at a specific property in Almena (54805)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Almena (54805)

Free. Goes to licensed drillers working Barron County.

Part of Barron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.