⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Ashland County › Ashland (54806)

Ashland, WI (54806): well depth, water level & drilling cost

✓ 416 WI DNR records · Ashland County

160 ftmedian well depth
126 ft–205 fttypical depth range
68 ftmedian static water level
10 gpmmedian yield (275 tests)

Pull every recorded well near a Ashland (54806) address — $49

How deep are wells in and around Ashland (54806), Wisconsin?

The median drilled well depth in and around Ashland (54806) is 160 ft, based on 279 wells with recorded depths in the state WI DNR database. Half fall between 126 ft and 205 ft; 90% are shallower than 242 ft.

How much does it cost to drill a well in and around Ashland (54806)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Ashland (54806)?

The median static water level is 68 ft below ground surface (middle half of wells: 32 ft–98 ft), from 277 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 24 100–150 ft 91 150–200 ft 90 200–300 ft 68 300–400 ft 5 400–600 ft 1 600+ ft 0
Looking at a specific property in Ashland (54806)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Ashland (54806)

Free. Goes to licensed drillers working Ashland County.

Part of Ashland County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.