⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County › Barronett (54813)

Barronett, WI (54813): well depth, water level & drilling cost

✓ 851 WI DNR records · Barron County

140 ftmedian well depth
87 ft–217 fttypical depth range
66 ftmedian static water level
15 gpmmedian yield (570 tests)

Pull every recorded well near a Barronett (54813) address — $49

How deep are wells in and around Barronett (54813), Wisconsin?

The median drilled well depth in and around Barronett (54813) is 140 ft, based on 573 wells with recorded depths in the state WI DNR database. Half fall between 87 ft and 217 ft; 90% are shallower than 280 ft.

How much does it cost to drill a well in and around Barronett (54813)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Barronett (54813)?

The median static water level is 66 ft below ground surface (middle half of wells: 35 ft–110 ft), from 573 measurements.

Drilled depth distribution

0–50 ft 18 50–100 ft 165 100–150 ft 126 150–200 ft 94 200–300 ft 131 300–400 ft 33 400–600 ft 6 600+ ft 0
Looking at a specific property in Barronett (54813)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Barronett (54813)

Free. Goes to licensed drillers working Barron County.

Part of Barron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.