⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Bayfield County › Bayfield (54814)

Bayfield, WI (54814): well depth, water level & drilling cost

✓ 606 WI DNR records · Bayfield County

180 ftmedian well depth
130 ft–298 fttypical depth range
74 ftmedian static water level
10 gpmmedian yield (411 tests)

Pull every recorded well near a Bayfield (54814) address — $49

How deep are wells in and around Bayfield (54814), Wisconsin?

The median drilled well depth in and around Bayfield (54814) is 180 ft, based on 417 wells with recorded depths in the state WI DNR database. Half fall between 130 ft and 298 ft; 90% are shallower than 460 ft.

How much does it cost to drill a well in and around Bayfield (54814)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Bayfield (54814)?

The median static water level is 74 ft below ground surface (middle half of wells: 38 ft–180 ft), from 412 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 23 100–150 ft 125 150–200 ft 83 200–300 ft 82 300–400 ft 38 400–600 ft 54 600+ ft 12
Looking at a specific property in Bayfield (54814)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bayfield (54814)

Free. Goes to licensed drillers working Bayfield County.

Part of Bayfield County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.