⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County › Birchwood (54817)

Birchwood, WI (54817): well depth, water level & drilling cost

✓ 923 WI DNR records · Barron County

61 ftmedian well depth
48 ft–94 fttypical depth range
33 ftmedian static water level
15 gpmmedian yield (740 tests)

Pull every recorded well near a Birchwood (54817) address — $49

How deep are wells in and around Birchwood (54817), Wisconsin?

The median drilled well depth in and around Birchwood (54817) is 61 ft, based on 740 wells with recorded depths in the state WI DNR database. Half fall between 48 ft and 94 ft; 90% are shallower than 151 ft.

How much does it cost to drill a well in and around Birchwood (54817)?

Applying published per-foot rates to the local median depth of 61 ft: drilling and casing alone typically runs $1,525–$3,965; a complete system including pump, pressure tank, and hookup typically runs $3,660–$6,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Birchwood (54817)?

The median static water level is 33 ft below ground surface (middle half of wells: 21 ft–50 ft), from 741 measurements.

Drilled depth distribution

0–50 ft 195 50–100 ft 381 100–150 ft 88 150–200 ft 49 200–300 ft 24 300–400 ft 3 400–600 ft 0 600+ ft 0
Looking at a specific property in Birchwood (54817)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Birchwood (54817)

Free. Goes to licensed drillers working Barron County.

Part of Barron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.