⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County › Brill (54818)

Brill, WI (54818): well depth, water level & drilling cost

✓ 331 WI DNR records · Barron County

72 ftmedian well depth
50 ft–100 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (223 tests)

Pull every recorded well near a Brill (54818) address — $49

How deep are wells in and around Brill (54818), Wisconsin?

The median drilled well depth in and around Brill (54818) is 72 ft, based on 245 wells with recorded depths in the state WI DNR database. Half fall between 50 ft and 100 ft; 90% are shallower than 127 ft.

How much does it cost to drill a well in and around Brill (54818)?

Applying published per-foot rates to the local median depth of 72 ft: drilling and casing alone typically runs $1,800–$4,680; a complete system including pump, pressure tank, and hookup typically runs $4,320–$7,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Brill (54818)?

The median static water level is 40 ft below ground surface (middle half of wells: 21 ft–60 ft), from 223 measurements.

Drilled depth distribution

0–50 ft 59 50–100 ft 108 100–150 ft 60 150–200 ft 12 200–300 ft 6 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Brill (54818)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Brill (54818)

Free. Goes to licensed drillers working Barron County.

Part of Barron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.