⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Rusk County › Bruce (54819)

Bruce, WI (54819): well depth, water level & drilling cost

✓ 925 WI DNR records · Rusk County

54 ftmedian well depth
41 ft–73 fttypical depth range
22 ftmedian static water level
10 gpmmedian yield (630 tests)

Pull every recorded well near a Bruce (54819) address — $49

How deep are wells in and around Bruce (54819), Wisconsin?

The median drilled well depth in and around Bruce (54819) is 54 ft, based on 645 wells with recorded depths in the state WI DNR database. Half fall between 41 ft and 73 ft; 90% are shallower than 108 ft.

How much does it cost to drill a well in and around Bruce (54819)?

Applying published per-foot rates to the local median depth of 54 ft: drilling and casing alone typically runs $1,350–$3,510; a complete system including pump, pressure tank, and hookup typically runs $3,240–$5,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Bruce (54819)?

The median static water level is 22 ft below ground surface (middle half of wells: 14 ft–35 ft), from 634 measurements.

Drilled depth distribution

0–50 ft 247 50–100 ft 327 100–150 ft 37 150–200 ft 17 200–300 ft 11 300–400 ft 1 400–600 ft 4 600+ ft 1
Looking at a specific property in Bruce (54819)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bruce (54819)

Free. Goes to licensed drillers working Rusk County.

Part of Rusk County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.