⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Douglas County › Brule (54820)

Brule, WI (54820): well depth, water level & drilling cost

✓ 354 WI DNR records · Douglas County

116 ftmedian well depth
88 ft–157 fttypical depth range
35 ftmedian static water level
10 gpmmedian yield (226 tests)

Pull every recorded well near a Brule (54820) address — $49

How deep are wells in and around Brule (54820), Wisconsin?

The median drilled well depth in and around Brule (54820) is 116 ft, based on 231 wells with recorded depths in the state WI DNR database. Half fall between 88 ft and 157 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Brule (54820)?

Applying published per-foot rates to the local median depth of 116 ft: drilling and casing alone typically runs $2,900–$7,540; a complete system including pump, pressure tank, and hookup typically runs $6,960–$11,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Brule (54820)?

The median static water level is 35 ft below ground surface (middle half of wells: 10 ft–75 ft), from 228 measurements.

Drilled depth distribution

0–50 ft 14 50–100 ft 62 100–150 ft 90 150–200 ft 40 200–300 ft 19 300–400 ft 3 400–600 ft 2 600+ ft 1
Looking at a specific property in Brule (54820)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Brule (54820)

Free. Goes to licensed drillers working Douglas County.

Part of Douglas County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.