⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Barron County › Comstock (54826)

Comstock, WI (54826): well depth, water level & drilling cost

✓ 608 WI DNR records · Barron County

118 ftmedian well depth
83 ft–160 fttypical depth range
40 ftmedian static water level
15 gpmmedian yield (396 tests)

Pull every recorded well near a Comstock (54826) address — $49

How deep are wells in and around Comstock (54826), Wisconsin?

The median drilled well depth in and around Comstock (54826) is 118 ft, based on 396 wells with recorded depths in the state WI DNR database. Half fall between 83 ft and 160 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Comstock (54826)?

Applying published per-foot rates to the local median depth of 118 ft: drilling and casing alone typically runs $2,950–$7,670; a complete system including pump, pressure tank, and hookup typically runs $7,080–$11,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Comstock (54826)?

The median static water level is 40 ft below ground surface (middle half of wells: 28 ft–59 ft), from 396 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 137 100–150 ft 130 150–200 ft 79 200–300 ft 41 300–400 ft 0 400–600 ft 0 600+ ft 1
Looking at a specific property in Comstock (54826)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Comstock (54826)

Free. Goes to licensed drillers working Barron County.

Part of Barron County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.