⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Burnett County › Danbury (54830)

Danbury, WI (54830): well depth, water level & drilling cost

✓ 3,434 WI DNR records · Burnett County

89 ftmedian well depth
60 ft–141 fttypical depth range
29 ftmedian static water level
18 gpmmedian yield (2,891 tests)

Pull every recorded well near a Danbury (54830) address — $49

How deep are wells in and around Danbury (54830), Wisconsin?

The median drilled well depth in and around Danbury (54830) is 89 ft, based on 2,921 wells with recorded depths in the state WI DNR database. Half fall between 60 ft and 141 ft; 90% are shallower than 200 ft.

How much does it cost to drill a well in and around Danbury (54830)?

Applying published per-foot rates to the local median depth of 111 ft: drilling and casing alone typically runs $2,775–$7,215; a complete system including pump, pressure tank, and hookup typically runs $6,660–$11,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Danbury (54830)?

The median static water level is 29 ft below ground surface (middle half of wells: 19 ft–40 ft), from 3,064 measurements.

Drilled depth distribution

0–50 ft 391 50–100 ft 1,246 100–150 ft 635 150–200 ft 340 200–300 ft 277 300–400 ft 31 400–600 ft 1 600+ ft 0
Looking at a specific property in Danbury (54830)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Danbury (54830)

Free. Goes to licensed drillers working Burnett County.

Part of Burnett County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.